Results 1 to 9 of 9

Thread: Water Storage

  1. #1
    Guest
    Join Date
    Apr 2012
    Location
    Lincoln Place
    Posts
    160

    Water Storage

    Well I FINALLY ordered my RO/DI unit. Now I have a few questions.

    1. I will be using 2 20g rubbermaid cans. I would like to put a valve near the bottom. What is everybody using and where can I get 2 of them?

    2. How long can you store saltwater after it is mixed in the can?

    3. How long does the water need to sit before I can use it?

    4. Do I need to have circulation pumps to mix the water?

    5. Anything else I need to know?

    Thanks

  2. #2
    Quote Originally Posted by bkHunt74 View Post
    Well I FINALLY ordered my RO/DI unit. Now I have a few questions.

    1. I will be using 2 20g rubbermaid cans. I would like to put a valve near the bottom. What is everybody using and where can I get 2 of them?

    Get a uniseal bulkhead alternative. Then you can simply plumb it with a PVC valve.

    2. How long can you store saltwater after it is mixed in the can?

    It depends on the salt mix. Reef Crystals, among others, contains vitamins and other organics. If the mix is kept agitated it will keep. If left unstirred the organics will degrade and ammonia can build up. Regular Instant Ocean does not contain organics and can be stored as long as you like with no need for circulation.

    3. How long does the water need to sit before I can use it?

    Most recommend letting it mix at least 24 hours.

    4. Do I need to have circulation pumps to mix the water?

    It is MUCH easier to use a powerhead to mix the saltwater but it isn't necessary if you want to use elbow grease.

    5. Anything else I need to know?

    Fill the water somewhere that won't be destroyed when you forget to shut the @#&% thing off and fill a 32 gallon Brute with 75 gallons of water. Or they sell those float switches.

    Thanks
    No problem.

  3. #3
    Guest
    Join Date
    Dec 2010
    Location
    Pittsburgh, PA
    Posts
    110
    1. For the valves, I would use 2 bulkheads. Yes, they will still work on rounded garbage cans. Once you have the bulkhead on you can then attach a valve. The bulkhead will be really reliable against any leaks. We do sell and always keep in stock a few size of bulkheads, 1/2", 3/4" 1", 1.5" and 2".

  4. #4
    Guest
    Join Date
    Dec 2010
    Location
    Pittsburgh, PA
    Posts
    110
    Oh and look into an In-line TDS meter, it measures Input and Output. You want to install the Input after the RO Membrane and the Output on the exit of the DI Cartridge. You can monitor when your membrane and DI needs changed. This instrument is vital for making reliable water, you never know when your RO membrane prematurely wears or when your DI Resin becomes prematurely exhausted.

  5. #5
    Guest
    Join Date
    Apr 2012
    Location
    Lincoln Place
    Posts
    160
    Thanks for the answers. The unit I bought has a build in pressure gauge, booster pump, built in monitor for TSS and to do automatic backwash. I will be getting 2 bulkheads then and some valves. Also I will just mix saltwater as needed.

    The critters will be much happier because I it will be a lot easier to do water changes since I will not have to haul jugs of water.

  6. #6
    Guest
    Join Date
    Apr 2012
    Location
    Lincoln Place
    Posts
    160
    Tss = tds.

  7. #7
    I mentioned uniseals because they are cheaper. :-) Bulkheads can be used just as effectively. Dave's Aquastock usually has uniseals in stock. I would consider them both pretty reliable if installed correctly.

  8. #8
    Guest
    Join Date
    Apr 2012
    Location
    Lincoln Place
    Posts
    160
    Are there any bulkheads that I can buy at Home Depot? Aqua World and Dave's are both the opposite way that I was going to pick up my RO/DI.

  9. #9
    elmers i do believe has some bulkheads along with wet pets

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •