View Full Version : May 19th Meeting

05-13-2012, 05:00 PM
May Meeting
- Our next meeting to be held on May 19th will be an open discussion with lead topics of Latin Names and their meanings presented by Anthony Calfo, and Electricity Basics; preventing hazards in the fish place with Bill Burnett

To keep to the open discussion feel free to bring pictures of your tank, fish room, or anything you have questions on, topics you might need answered or just want to share your knowledge about!

- PMASI will provide Pizza

Location: Comfort Inn, Rodi Road - Monroeville
Start Time: 6pm

05-16-2012, 10:26 AM
THANK YOU for addressing aquarium safety/ electricity. I have had a lot of questions about ground probes, surge protectors, and the like. I will be there on Saturday. It might save my life one day!

05-16-2012, 01:13 PM
Should be a good meeting.

....and pizza!!!

YUM :)

05-16-2012, 01:59 PM
Here is an article on outlet strips he wrote: http://www.beananimal.com/articles/outlet-strips.aspx

Back to the important stuff, pizza of course. Do you need anyone to bring anything else? I could bring some pop and cups or something else if it's needed.

05-16-2012, 03:06 PM
Also to remind you this is just a open discussion on the topics above, while some of us might be certifiable we are not electricians or latin scholars.

If you have questions you can also bring photo's of your setups. If you are embarrassed just say its a friends setup and they couldn't make it.

Thanks Jerpa, unfortunately the hotel does not allow us to provide food or drink not purchased from the hotel itself. You are more than welcome to provide for yourself however.


05-16-2012, 05:39 PM
Sounds like a good reason to visit the bar...

Thanks for the response.

05-17-2012, 03:36 PM
Who's bringing some nice raffle items?! I need to know how much cash to bring! :p

05-19-2012, 12:43 AM
Is it okay if a bring in a snail for identification? I suspect he might be a snail-eater... If that is the case, perhaps I can adopt him out!

05-20-2012, 10:59 AM
Saturday's meeting was very helpful, Bill Burnett’s talk on quality power strips was on the mark to help stop issue’s before they happen.
On that note, I spoke about quality float valves I found outside are industry that are very reliable made by Jobe the link below will help in finding them.


05-21-2012, 10:31 AM

Thanks for sharing!



05-21-2012, 02:16 PM
Greg, I think it was you that brought the orange digi. Just had to say it took right to my tank and seems to be doing great! Thanks so much for bringing it! Definitely let me know if you want to trade some pieces in the future!